BSHDV - SHARPIE ULTRA FINE POINT BLUE
- MSDS: BSHDV
- Manufacturer: SANFORD CORP
- Product Name: SHARPIE ULTRA FINE POINT BLUE
- National Stock Number: 7510-00N041692
Product Identification
Product ID:SHARPIE ULTRA FINE POINT BLUE
MSDS Date:07/07/1989
FSC:7510
NIIN:00N041692
MSDS Number: BSHDV
Responsible Party
BELLWOOD, IL 60104
US
Emergency Phone: 800-228-5635
Info Phone: 800-228-5635
Cage: 86874
Contractor
Telephone: 1-800-323-0749
Cage: 86874
Ingredients
PROPYL ALCOHOL; (N-PROPANOL) (SOLVENT) (ALL PHYSICAL &
CAS: 71-23-8
RTECS: UH8225000
OSHA PEL 200 PPM;250 PPM STEL
ACGIH TLV: 200 PPM;250 STEL, S
BUTYL ALCOHOL; (N-BUTANOL) (SOLVENT)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 50 PPM, S, C
ACGIH TLV: 50 PPM, S, C
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL)
CAS: 123-42-2
RTECS: SA9100000
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
DYES
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
1500. PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
Fire Fighting
Flash Point Method:TOC
Flash Point:84F,28.9C
Lower Limits:2.2%
Upper Limits:14%
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WIPE UP W/ABSORBENT MATERIAL & DISCARD AS
SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
MARKER WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE UNDER NORMAL USE CONDITIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:207F,97C
Vapor Pres:13 @ 20C
Vapor Density:2.07
Spec Gravity:0.8044 (H*2O=1)
Evaporation Rate & Reference:1.3 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS, MOBILE LIQUID W/MILD ALCOHOL
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE.
Stability Condition to Avoid:NOT AVAILABLE.
Hazardous Decomposition Products:NOT AVAILABLE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . DISCARD AS SOLID WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.